Disaster_Area
Gadget Monger
If you're planning to pick up a hood for it, beware... not all Bay I Hoods are not created equal. The metal Yashica hoods I've tried fit both my 124g and my Rolleicord Vb... however I have two original Rollei metal Bay I hoods and they do NOT fit my 124g, something is VERY slightly off... by just a fraction of a millimeter and the Rollei hoods will not mount properly.
Scott --
Member
FWIW, I use a Rollei hood on my Yashica-Mat (original, non-124 kind). There is something a little off tolerance-wise, as the Rollei hood is a little stiff to mount. A little Rem oil on the springs helped that, though.
All that said, a third-party Bay I hood's gonna be a much cheaper way to go than a Rollei hood.
All that said, a third-party Bay I hood's gonna be a much cheaper way to go than a Rollei hood.
Disaster_Area
Gadget Monger
Yeah.. the Rollei hoods are more expensive... but they're definitely more numerous and easier to find than the metal Yashica ones... you can get plastic 3rd party ones for about $10 on ebay... works just as well as the more expensive vintage ones.
jamesj
Well-known
Last night i cleaned it up with some windex and q tips. cleaned up really nice.
It seems to fire ok, Im not to sure if i should send it to mark hama for a CLA.
As for a lens hood i might try and pick up a ebay lens hood too...
It seems to fire ok, Im not to sure if i should send it to mark hama for a CLA.
As for a lens hood i might try and pick up a ebay lens hood too...
Zonan
Well-known
Indeed, Mark Hama is the man for doing a CLA on Yashicas- he did a great job on mine about a year ago.
nikon_sam
Shooter of Film...
Run a roll through it first and then decide if it needs service...
I don't use the meter on mine, although it does work, instead I meter with either a Weston Master II or use the meter in my Mamiya m645 and set it to that reading...Works just fine for me!!!
dazedgonebye
Veteran
Yea, I don't think I'd ruin the great financial deal you got there by paying for a CLA. If it works, shoot it.
I've got a cheap ebay plastic hood...works fine.
I've got a cheap ebay plastic hood...works fine.
jamesj
Well-known
i went down to tempe camera and bought a roll of film now its sitting on my desk ready to take some shots.
Just to see how much it would cost i emailed Mrak he quoted me 145+15 for shipping...
wow... i think ill run a roll through it first.
Just to see how much it would cost i emailed Mrak he quoted me 145+15 for shipping...
wow... i think ill run a roll through it first.
jamesj
Well-known
Here's what the 124G looks like with a third-party plastic bay hood:
thats not to bad looking... that will be the next thing i buy for it.
laurentb
Established
I have 2 hoods for my rolleiflex, but the one for the viewing lens is home made (by the previous owner) and round. It fitted the 'Mat as well, and a pair of regular Rollei hoods would not (the clearance is too limited)
jamesj
Well-known
So i noticed that the infinity on the camera is slightly off...
is this going to cause a problem?
is it a fix i could do?
any help?
is this going to cause a problem?
is it a fix i could do?
any help?
jamesj
Well-known
ok im going to bump this...
any help?
any help?
Vilk
Established
so did you shoot that roll you were going to shoot? was it a problem?
laurentb
Established
What is it that's off ? I wouldn't care too much if it's only the focusing scale (although I prefer it to be accurate), as long as what's in-focus on the ground glass is in-focus on the negative.
jamesj
Well-known
finally got the roll back from the developers.
inside self portrait, 30th of a second at 3.5
Wife surfing in bed. 3oth of a second at 3.5
my coworker clarice. Dont know if this is a light leak on the left side of the frame. might be the lighting, I am going to change the light seals. Cant remember exposure.
my boss Jean on the phone.
And a railroad shot... i think it was 500th of a second at 3.5 or something.
inside self portrait, 30th of a second at 3.5
Wife surfing in bed. 3oth of a second at 3.5
my coworker clarice. Dont know if this is a light leak on the left side of the frame. might be the lighting, I am going to change the light seals. Cant remember exposure.
my boss Jean on the phone.
And a railroad shot... i think it was 500th of a second at 3.5 or something.
denmark.yuzon
Streetographer
this is what he quoted me too... it includes full overhaul of your TLR.. and other parts replaced that has minor damage.. but it doesnt include major parts that needs replacement... My Yashica D is working good, im just too OC. i didnt send it to him because i have no spare money that time..