menos
Veteran
I made a 13x19 yesterday (that darn Canon printer eats color cartridges by the truck load, despite, I print BW exclusively).
For the print, I shot the frame again with the D3 and processed from the NEF file.
After printing, I had another take at the blacks, which I liked more deep on paper.
Here are also two crops from the file, prepared for print (beware, sharpening for print is done heavier, so they show not optimum for web so close up).
I found my method with the 12MP D3 and 60mm Micro could be limited to 13x19.
Beyond, a lot of work would have to be done, which robs the fun of it for me - so another DSLR must be added with some more clean pixels ;-)
"Z" crop 1 | bright side
"Z" crop 2 | dark side
I find, the negative gives much more - for now, the D3 is the limiting factor.
For the print, I shot the frame again with the D3 and processed from the NEF file.
After printing, I had another take at the blacks, which I liked more deep on paper.
Here are also two crops from the file, prepared for print (beware, sharpening for print is done heavier, so they show not optimum for web so close up).
I found my method with the 12MP D3 and 60mm Micro could be limited to 13x19.
Beyond, a lot of work would have to be done, which robs the fun of it for me - so another DSLR must be added with some more clean pixels ;-)

"Z" crop 1 | bright side

"Z" crop 2 | dark side
I find, the negative gives much more - for now, the D3 is the limiting factor.