tr0x
Member
Hi, my Zorki-1 shutter is absolutely noisier than my FED-2, is this ok or not?
Thanks,
Thanks,
zorki-1 noise...
- Thread starter tr0x
- Start date
- Latest activity Latest activity:
- Replies 12
- Views 972
AshenLight
Established
tr0x said:
Same here and it hasn't been a problem at all.
tr0x
Member
Thanks!AshenLight said:
Now i wonder if i can get a quieter shutter for my Zorki... i'd like to have the sound of the FED-2, but maybe it's just impossible...
AshenLight
Established
tr0x said:
I'm not sure how you'd do that. Perhaps someone else on the FSU forum with experience maintaining Zorkis would have an idea about how to do something like this.
POSTI-Tuomo
Level 1 Camera Repairman
Maybe the shutter curtains are over-tensioned? Sounds like a CLA operation to me... Info is plentiful on this site as how to CLA your camera. My Zorki 1 is quieter than my Fed-2... I CLA'd it myself.
santino
FSU gear head
even a bunch of Zori 1s have the right to sound different, you've got to have a lot of luck!
wolves3012
Veteran
There's variation between examples of all of them, don't worry too much. My Zorki 1 is the queitest FSU I have (just to make you jealous!) but I have stripped, cleaned and re-lubed it to the last screw. I found I could reduce the curtain tension quite a bit afterwards, which surely must be part of the equation. By the way, the FED 2 I have is definitely the loudest of my bunch, so you have the opposite results!
tr0x
Member
I've checked the shutter and i've noticed that the first curtain is pretty slow compared to the second one, probably a CLA will definitely solve my problems...POSTI-Tuomo said:
Spyderman
Well-known
My Zorki-1 is my quietest FSU camera. It's the shutter curtain tension. But if the camera is full of dried-out grease, it won't work with low tension and would need cleaning first...
BTW: My FED-2s are quiet.
BTW: My FED-2s are quiet.
wolves3012
Veteran
The first curtain should be a little snappier than the second, not the other way around. If you press & release on "B" it should make a sort of "clip-clop" sound.tr0x said:
After I gave mine a thorough CLA it only needed 3 turns on the first curtain tension and 2 on the second, which is a bit low but it works fine. Before CLA it had about 5 and 3.
Spyderman
Well-known
I second that. 3 and 2 is good. Sometimes 3.5 and 2.5.
tr0x
Member
Ok, since my zorki-1 needs a complete CLA, maybe i can merge the two projects... well, yes:
CLA + Black paint
And in the end, i think a Black Zorki-1 would be very nice 😎
CLA + Black paint
And in the end, i think a Black Zorki-1 would be very nice 😎
wolves3012
Veteran
Do a search on Zorkikat's postings, he did a thread recently on how to de-chrome one and paint it. I'd really suggest you get someone with a spraygun to paint it, you will never get a good finish otherwise...good luck, it should look nicetr0x said:
Similar threads
