TheMapleLeafForever
Established
Got IT!!!
Found that the folding handle of my finger-nail trimmers (!) fit perfectly in the shoe....VERY careful bend on each side and VOILA - it accepts the SBOOI perfectly now![]()
Relief! I am getting my first SBOOI and was worried this might happen to me too. Glad you got it sorted with Erik's help.
Mr_Flibble
In Tabulas Argenteas Refero
For anyone wondering what a Zeiss 433/24 (in this case a 433/25) Albada finder on a Leica II looks like, and why it's not a good fit:
There are "Hotshoe extenders" (from HAMA I believe) that raises the accessory shoe about 10mm, but that'll probably affect the composition, as well as make the whole camera set-up look ...well...less aesthetically pleasing


There are "Hotshoe extenders" (from HAMA I believe) that raises the accessory shoe about 10mm, but that'll probably affect the composition, as well as make the whole camera set-up look ...well...less aesthetically pleasing
Dralowid
Michael
Yes interesting but just wrong on so many levels!
TheMapleLeafForever
Established
What meter does everyone use for their Leica IIIs?
I have a Voigtlander VC 1, which has no exposure compensation unlike my Reveni. If I want to use a yellow filter, would the best way of manually compensating +1 stop just be to put the ISO at 400 (assuming my film is ISO 200)?
Just double checking!
EDIT: Or should I be changing it to 100 ISO?
I have a Voigtlander VC 1, which has no exposure compensation unlike my Reveni. If I want to use a yellow filter, would the best way of manually compensating +1 stop just be to put the ISO at 400 (assuming my film is ISO 200)?
Just double checking!
EDIT: Or should I be changing it to 100 ISO?
Dralowid
Michael
Sunny 12.5 mostly
Or if feeling in the mood Sekonic Twinmate L208 which must be one of the simplest.
I have a selection of Westons and other old meters but no longer use them.
re filters, just compensate on the camera. changing film speed on the meter is something you will forget you have done...
Or if feeling in the mood Sekonic Twinmate L208 which must be one of the simplest.
I have a selection of Westons and other old meters but no longer use them.
re filters, just compensate on the camera. changing film speed on the meter is something you will forget you have done...
Malcolm M
Well-known
Give up NOW while you still have some money and some sanity. It starts off slowly, with one body and lens running through a couple of films a year. Then you come across another lens or two, and it starts to escalate exponentially. I'm up to four bodies and nine lenses. Discovering RFF is fatal.Advice for a new Leica III owner?
MISH
Well-known
Give up NOW while you still have some money and some sanity. It starts off slowly, with one body and lens running through a couple of films a year. Then you come across another lens or two, and it starts to escalate exponentially. I'm up to four bodies and nine lenses. Discovering RFF is fatal.
Save yourself, it's too late for us.
(five bodies 9 lenses)
Ko.Fe.
Lenses 35/21 Gears 46/20
I have IIIc. I use same meter as with any other camera. iPhone exposure meter app. Or Sekonic TwinMatte.
Yellow filter barely need any compensation, orange, green and red do.
Yellow filter barely need any compensation, orange, green and red do.
TheMapleLeafForever
Established
I have IIIc. I use same meter as with any other camera. iPhone exposure meter app. Or Sekonic TwinMatte.
Yellow filter barely need any compensation, orange, green and red do.
Yeah I noticed that when I put the filter over my meter. It is within a stop difference.
cassel
Well-known
For anyone wondering what a Zeiss 433/24 (in this case a 433/25) Albada finder on a Leica II looks like, and why it's not a good fit:
![]()
![]()
There are "Hotshoe extenders" (from HAMA I believe) that raises the accessory shoe about 10mm, but that'll probably affect the composition, as well as make the whole camera set-up look ...well...less aesthetically pleasing![]()
I think it looks cool
What I was thinking is what if the shoe on the finder was MOVED -not lifted - so that the finder was offset to the left - therefore not blocking the shutter speed dial.
That would involved removing the screws and drilling holes
cassel
Well-known
Here they are with the finders I was talking about!

Mr_Flibble
In Tabulas Argenteas Refero
Unfortunately the foot on the Zeiss finder is riveted in position.
I guess one could punch out the rivets, drill new holes and reattach the foot. Even adjust the angle slightly to have it match the FOV for a particular focus distance.
....if one was thus mechanically inclined.
I guess one could punch out the rivets, drill new holes and reattach the foot. Even adjust the angle slightly to have it match the FOV for a particular focus distance.
....if one was thus mechanically inclined.
TheMapleLeafForever
Established
How is the accuracy of the SBOOI in general?
I am looking at one for about $120 and while the metal surface isn't the best, the glass is clean and clear.
I am looking at one for about $120 and while the metal surface isn't the best, the glass is clean and clear.
cassel
Well-known
How is the accuracy of the SBOOI in general?
I am looking at one for about $120 and while the metal surface isn't the best, the glass is clean and clear.
I think it's great! No real accuracy issues noticed by me - the close up dashed lines help.
TheMapleLeafForever
Established
I think it's great! No real accuracy issues noticed by me - the close up dashed lines help.
No doubt! I wonder if there might be any issue using it at further distances though.
To quote another RFF member " Towards infinity two things come into play: parallax and a slight magnification of the image relative to the (fixed) framelines. When looking through the finder, the effects tend to cancel at the bottom of the frame but add at the top. It appears therefore that the bottom frameline is good enough at all distances but 'near' and 'far' framelines are needed at the top."
Thoughts?
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.