farlymac
PF McFarland
This camera had been sitting around a long time before I got it. The shutter needed some adjustment to be able to get some functionality out of it. It's still not right, alternately capping and gapping, so I'll be sending it in some time later for a service.
It came with a Canon 2.8/50 that had a bit of fungus. I cleaned that out, and also did some more work on my Canon 1.8/50, hoping to completely remove the haze. It didn't happen, but at least it is usable as is. I also have a Leitz Elmar 4/90 with a scratched front element I got really cheap (it could be used for a portrait lens). And, I was able to get a Canon Auto-Up II for 1.8/50 to be able to do close-up work. The camera also came with the Canon Meter-2 which still works, and seems accurate.
I loaded up a roll of Ilford FP4, set the shutter speed on 1/125, and put the camera with meter and three lenses in a bag, and headed up the road for some random photo opportunities.
For the Canon lenses, I was using an Ednalite 40mm-Series VI adapter with an Ednalite 6-B hood, no filter, and the Auto-Up II (on the 1.8/50). For the Leitz Elmar, I used a Ricoh clamp-on Series VI hood, and a screw-in Ricoh Y2 filter.
I like this rig! Other than the pain of changing screw-mount lenses, it's a great handling camera. It's just the right size for my hands, and I like the weight of it. It's also very good looking. I could agree with the meter output, though maybe mis-read it a bit on a couple of shots. It figured that the 40-40.5mm adapter I ordered came in the mail while I was out shooting. The Ednalite rig is okay, but it's not the easiest to get on and off the lens. And I've got a perfectly good set of filters and hood in 40.5mm.
The two Canon lenses performed well. The Leitz? Well, I've had plans to replace it anyway. It's just mostly for testing purposes. The rangefinder is accurate, and the Auto-Up II worked perfectly.
It's a keeper.
PF
The Good
2.8/50 (after exposure correction)

Carvin's Creek by br1078phot, on Flickr
2.8/50

Verndale Park Shelter by br1078phot, on Flickr
2.8/50

Standing Tall by br1078phot, on Flickr
2.8/50

Looking Into The Past by br1078phot, on Flickr
1.8/50

Saltpetre Cave Home by br1078phot, on Flickr
1.8/50 plus Auto-Up II

Weathered Fence by br1078phot, on Flickr
And the Bad
2.8/50

76 Gapping by br1078phot, on Flickr
2.8/50

Capping by br1078phot, on Flickr
1.8/50

Flare by br1078phot, on Flickr
4/90 (scratched up front element)

Saltpre Cave Road Church by br1078phot, on Flickr
Make sure to review the entire set on Flickr to see which lens or accessory was used (check the tags) for each shot, along with other explanations and narrative.
http://www.flickr.com/photos/7699588@N07/sets/72157642552668823/
It came with a Canon 2.8/50 that had a bit of fungus. I cleaned that out, and also did some more work on my Canon 1.8/50, hoping to completely remove the haze. It didn't happen, but at least it is usable as is. I also have a Leitz Elmar 4/90 with a scratched front element I got really cheap (it could be used for a portrait lens). And, I was able to get a Canon Auto-Up II for 1.8/50 to be able to do close-up work. The camera also came with the Canon Meter-2 which still works, and seems accurate.
I loaded up a roll of Ilford FP4, set the shutter speed on 1/125, and put the camera with meter and three lenses in a bag, and headed up the road for some random photo opportunities.
For the Canon lenses, I was using an Ednalite 40mm-Series VI adapter with an Ednalite 6-B hood, no filter, and the Auto-Up II (on the 1.8/50). For the Leitz Elmar, I used a Ricoh clamp-on Series VI hood, and a screw-in Ricoh Y2 filter.
I like this rig! Other than the pain of changing screw-mount lenses, it's a great handling camera. It's just the right size for my hands, and I like the weight of it. It's also very good looking. I could agree with the meter output, though maybe mis-read it a bit on a couple of shots. It figured that the 40-40.5mm adapter I ordered came in the mail while I was out shooting. The Ednalite rig is okay, but it's not the easiest to get on and off the lens. And I've got a perfectly good set of filters and hood in 40.5mm.
The two Canon lenses performed well. The Leitz? Well, I've had plans to replace it anyway. It's just mostly for testing purposes. The rangefinder is accurate, and the Auto-Up II worked perfectly.
It's a keeper.
PF
The Good
2.8/50 (after exposure correction)

Carvin's Creek by br1078phot, on Flickr
2.8/50

Verndale Park Shelter by br1078phot, on Flickr
2.8/50

Standing Tall by br1078phot, on Flickr
2.8/50

Looking Into The Past by br1078phot, on Flickr
1.8/50

Saltpetre Cave Home by br1078phot, on Flickr
1.8/50 plus Auto-Up II

Weathered Fence by br1078phot, on Flickr
And the Bad
2.8/50

76 Gapping by br1078phot, on Flickr
2.8/50

Capping by br1078phot, on Flickr
1.8/50

Flare by br1078phot, on Flickr
4/90 (scratched up front element)

Saltpre Cave Road Church by br1078phot, on Flickr
Make sure to review the entire set on Flickr to see which lens or accessory was used (check the tags) for each shot, along with other explanations and narrative.
http://www.flickr.com/photos/7699588@N07/sets/72157642552668823/