tunalegs
Pretended Artist
I recently picked up this rather crude scale focus 35mm camera. Cleaned the lens and regreased the helical, which was the most nightmarish experience I've ever had working on any camera - despite the apparent simplicity of the camera.
Anyway, the Halina 35x was made by Haking in Hong Kong, starting around 1959. It's a rather blatant rip off an older, also rather crummy camera, the Nescon 35. For good measure Haking ripped off Petri's red dot icon. One wonders why they only copied ideas from the bottom of the barrel (ok, so Petri did make a few rather nice cameras - but still).
The Nescon 35 BTW, was a development of the Aruba 35, which apparently was advertised as a Leica for 4000 yen...
The Halina 35x sold for just short of £8 when new - so it was pretty darned cheap for a 35mm camera. The camera was most famous for being made out of metal, apparently.
Interesting notes: two bladed leaf shutter, speed controlled by spring tension. The center element of the triplet lens is uncoated - I guess Haking were really pinching the pennies hard.
Despite the overall lack of confidence this instilled in me for this mechanism, the results are kind of better than I had expected...
It's acceptably sharp in the center (acceptable for 5x7 prints anyway - probably not for anything larger) - but the focus falls off noticeably in the edges, even at f11. There is some slight vignetting too. The overall effect is reminiscent of the Lomo LC-A in my opinion - but without the noticeable pincushion distortion.
Crop. Shot at f5.6 noticeably soft.
Kind of odd flare in a strip along the side.
Hey! I'm actually pretty good at guessing distances without a rangefinder it turns out! One thing I do not like about the lens is the way it renders OOF areas. But I can't put my finger on what it is that I don't like about it. It's smooth, but in a strangely blurred way - there's something rather unnatural looking about it.
I wasn't expecting much, so it did exceed my expectations. However it's a pretty mediocre lens even for a low price triplet. I guess considering these things cost half of what an Argus C3 cost that is acceptable though. Kind of. :lol: