introduction (and a question)

T

the lobster

Guest
Hello all. First let me say that I have been reading here for a short time and find it very informative. I look forward to enjoying more time here.

I am new to rangefinders; I purchased my first one today! I went with an inexpensive Ricoh 520M cds. I am certain it will the the first in a long line of RFs to come!

I was hoping someone on this forum was familiar with this camera. I did some online searching but could not find what I was looking for. I did find a site selling the manual but I can't shell out $36 for it.

What I can't figure out is how to set the film speed dial. The window is located on the underside on the lens, and there is no apparent ring to adjust it. Needless to say, I do not want to force anything! If it helps, the lens is a Rikenon F2 48mm. Thanks for looking!
 
Hi lobster.
Sorry can't help you with the ricoh, but i'm sure it's a great camera and you will enjoy it here too. :)
 
DX Code?

DX Code?

Welcome Lobster!

Perhaps your camera sets the film speed from the DX code on the film cartridge? Some autos have this feature. Enjoy the forum!

D2:)
 
Well, I figured it out and it is embarrassingly simple. It just required very little pressure, and I was too tentaive at first to use any amount force.

Thanks to those who looked and replied.
 
Welcome to the forum Lobster. You're going to love it here except for one thing. GAS (Gear Acquisition Syndrome). :(

Others here can tell you of some of the symptoms. Unfortunately, there is no known cure at this time. However research continues and we aren't giving up hope. :D
 
FrankS said:
There actually is one known cure - death.
Click to expand...
I dunno. Then the estate sales show up on eBay and it starts all over again...

Hey, I finally figured out reincarnation!! :D

Gene
 
Welcome Lobster,
I remember seeing your cousin Larry on TV a few years back, lol. C'mon in, pull up a chair and make yourself at home. We promise not to bite. Careful on the GAS, it'll sneak up on you. Believe me, I know.
 
Lobster:

This Japanese website has a series of photos of the Ricoh 520M EE, I think it's the selenium meter version of your Cds camera.

http://www.asahi-net.or.jp/~rd2h-ari/camera_shoukai.htm

Frequently the film speed is set by depressing a small metal or plastic tab on the same lens ring as the filmspeed window. While holding the tab down you rotate a ring. That brings in the correct film speed. Look for a small slot on the ring somewhere. Sometimes the tab gets broken off and only the slot will remain.

-Paul
 
Thanks for the link, Paul.

That is exactly how it's done. Initially I was tentative about "forcing something". But then I figured it out.
 
Welcome to RFF, Lobster! Nice buch of gearheads, err, FOLKs here to share experiences with!
 
You must log in or register to reply here.
Back
Top Bottom