twopointeight
Well-known
Have all the bugs been worked out with the XPro2 bodies yet? Or, are we still buying the first batch? Time to buy?
Is the XPro2 ready?
- Thread starter twopointeight
- Start date
- Latest activity Latest activity:
- Replies 16
- Views 2K
shawn
Veteran
No, there are still bugs but not massive ones. The couple I run into:
There is an issue with the camera not auto switching OVF magnification once you switch it yourself. This can be corrected by hot swapping a lens.
Wifi networking is still buggy. In my case it works for transfers to my phone (using the network generated by the camera) but trying to attach it to my home network (to transfer to the computer) is very hit or miss, with much more misses and the camera locking up.
There may still be an issue with the camera set to sequential writes (fill first card then switch to second) to the dual cards getting confused and using the second card when there is still a bunch of space on the first. I haven't hit this in a bit so it may have been corrected by the first firmware update. Fuji fixed more bugs in that update than the release notes suggest.
Based on Fuji's past history it is very safe to say future firmware updates will continue to improve the XP2.
Shawn
EDIT: My "No" was to the question of if all the bugs were worked out. Not to the idea of if the XP2 is "ready." The XP2 is ready enough for me to finally decide to sell my FF Nikon and most of my lenses. Will be listing them soon.
There is an issue with the camera not auto switching OVF magnification once you switch it yourself. This can be corrected by hot swapping a lens.
Wifi networking is still buggy. In my case it works for transfers to my phone (using the network generated by the camera) but trying to attach it to my home network (to transfer to the computer) is very hit or miss, with much more misses and the camera locking up.
There may still be an issue with the camera set to sequential writes (fill first card then switch to second) to the dual cards getting confused and using the second card when there is still a bunch of space on the first. I haven't hit this in a bit so it may have been corrected by the first firmware update. Fuji fixed more bugs in that update than the release notes suggest.
Based on Fuji's past history it is very safe to say future firmware updates will continue to improve the XP2.
Shawn
EDIT: My "No" was to the question of if all the bugs were worked out. Not to the idea of if the XP2 is "ready." The XP2 is ready enough for me to finally decide to sell my FF Nikon and most of my lenses. Will be listing them soon.
jsrockit
Moderator
Seems to work fine for me... but I don't stress the small stuff when it comes to cameras.
kuzano
Veteran
Timmyjoe
Veteran
Don't shoot with the X-Pro 2, but WiFi is a Godsend when you're working with editors who want everything yesterday. I can WiFi an image from my camera to my iPhone, tweak it slightly in Photogene, and zip it off to an editor without having to take more than a minute or so break from what I'm covering. On developing news assignments, it's a life saver.
Best,
-Tim
Best,
-Tim
back alley
IMAGES
jsrockit
Moderator
My guess is that you change the lens while the camera is still on.
back alley
IMAGES
that would be my guess as well...but i've never heard that term and wanted to confirm...
macjim
Well-known
I wouldn't recommend that as a charged sensor will attract dust etc. It's not recommended by the manufacturers for the same reason.
35photo
Well-known
"Hot Swapping" to my knowledge I have seen it used when swapping out hard drives.. Never seen it used in camera reference..
jsrockit
Moderator
Yeah, those of us that enjoy digital clearly only do it because loading and unloading film is so hard...
sojournerphoto
Veteran
jsrockit
Moderator
Good point... I wasn't suggesting it, just assuming that is what it meant.
shawn
Veteran
shawn
Veteran
Normally I don't. But other than doing a complete reset of the camera this is the only other known way of fixing this bug in the XP2.
As delivered it will automatically switch OVF magnification based on what lens you have mounted. If you ever switch magnification yourself the camera will not longer ever auto switch the OVF magnification. The two ways to correct this is to do a complete factory reset or to hot swap a lens once. Once you hot swap a lens the camera will continue to switch OVF magnification again any time you change a lens hot swapped or not.
If you manually switch OVF magnification this breaks again requiring another hot swap or camera reset.
Obviously the camera shouldn't be doing this, it isn't how the XP1 works, it is a bug.
Shawn
shawn
Veteran
The IOS transfer works well as the camera is creating the wifi network. This also allows you to use the camera in remote control mode with your phone as a separate viewfinder which can be handy for working at odd angles. The remote option does OK but the refresh rate varies a bit so there is probably still some optimization available there.
What typically does not work is getting the camera onto an existing network to transfer photos to a computer. My XP2 locks up pretty regularly when trying to do that.
Shawn
