Leica M3 advance lever problem (Have to advance 3 times)

jusxusfanatic

Well-known
Local time
2:49 AM
Joined
Aug 1, 2016
Messages
638
Location
Hong Kong
Leica M3 advance lever problem.

I have to advance 3 times in order to take a shot. My M3 is a DS version (Double stroke). The first stroke is smooth, the second one stars to tighten up a bit, and the third one is the last stroke. I wonder what's the first stroke.

I can still take pictures. The roll does move, but I really don't know why I need to advance 3 times. Thanks 🙂
 
I had a similar problem, sometimes my M3 DS would need 3 strokes to advance film. On the frames that needed 3 strokes, the spacing between the shots was very uneven.
Had to get it repaired, the gearing in the advance mechanism was worn out.
 
I had a similar problem, sometimes my M3 DS would need 3 strokes to advance film. On the frames that needed 3 strokes, the spacing between the shots was very uneven.
Had to get it repaired, the gearing in the advance mechanism was worn out.

Oh, so it wasn't just me! Glad to head that.. Were the photos fine? The ones that you need 3 strokes, because all of my shots need 3 strokes 🙁
 
The photos were fine, just a lot of wasted space between them.
Mine also worked correctly without film, once the film was in, the problems started.
 
like this

RbgKrmP.jpg
 
Back
Top Bottom