teemu.laine
Member
Hello all!
Got my first Leica wednesday and finally I managed to develop my first roll (Efke KB 100). I´ll have to admit, that I´m still amazed of the quality my roll came out. And I´m amazed of the build quality of this equipment, mechanics work just like they should. I´ve used some Zorki´s and FED´s before so I´m not completely new to the rangefinders.
I bought my M6 with 35mm Summicron-M, 90mm Elmarit and 15mm CV Heliar with a viewfinder. I got it at a really fair price (a bit over 2000 euros which equals ~2500USD). Body and 35mm requires a CLA, because all shutters speeds don´t turn on the light meter properly. And the aperture on my 35mm won´t open completely (at f2 aperture blades are closed for the amount of 2/3 stops). Full CLA won´t of course cost me a thing, all expenses go to the store which sold me this set.
Now I´ll grab my Leica and 35mm Summicron and head out to the city!
Got my first Leica wednesday and finally I managed to develop my first roll (Efke KB 100). I´ll have to admit, that I´m still amazed of the quality my roll came out. And I´m amazed of the build quality of this equipment, mechanics work just like they should. I´ve used some Zorki´s and FED´s before so I´m not completely new to the rangefinders.
I bought my M6 with 35mm Summicron-M, 90mm Elmarit and 15mm CV Heliar with a viewfinder. I got it at a really fair price (a bit over 2000 euros which equals ~2500USD). Body and 35mm requires a CLA, because all shutters speeds don´t turn on the light meter properly. And the aperture on my 35mm won´t open completely (at f2 aperture blades are closed for the amount of 2/3 stops). Full CLA won´t of course cost me a thing, all expenses go to the store which sold me this set.
Now I´ll grab my Leica and 35mm Summicron and head out to the city!
Last edited:
bobofish
Two-fisted Atom Smasher
Welcome, congratulations, and good luck!
SolaresLarrave
My M5s need red dots!
Looks really good! Congratulations!
Flyfisher Tom
Well-known
Congratulations, they are marvels of workmanship relative to other systems. And welcome to the forum 
regit
Established
teemu.laine said:
Enjoy the camera
Just a note, if I can make out the serial number, your 'Cron is type IV and it is normal for the aperture not opening fully. But since the CLA is free, no harm letting the store have a look.Stephanie Brim
Mental Experimental.
Mmm...IV 'cron.
teemu.laine
Member
Really? If I meter a white wall with my 90mm at f2.8 and my 35mm at f2.8 I have to compensate 2/3 stops up with 35mm if I want to get the same results (I have to open up almost to f2).regit said:Enjoy the camera
T
Treb
Guest
regit said:
That's indeed normal for a type IV 'cron, mine does it too. It's not a bug it's a feature!
Nice set you've got, enjoy! I've stumbled across a CV 15mm yesterday, 299 euro's with viewfinder. Tempting...
teemu.laine
Member
Great, thanks for the info! Maybe everything works normally after CLA of that body.
John
Well-known
Very nice set Teemu. Keep us updated with your progress.
Ronald M
Veteran
If you are reading the same area of the wall, ie not reduced size with the 90, the readings will be the same.
DO NOT ever use the lens full open to check anything. Most all my leica lenses seem not to give a full stop more light by the meter when opening from the next to full open stop.
Check them both at 4 or 5.6 and move in with the 35 so the same area is covered.
I can`t remember if my 35 IV opens full and it inaccessable now.
DO NOT ever use the lens full open to check anything. Most all my leica lenses seem not to give a full stop more light by the meter when opening from the next to full open stop.
Check them both at 4 or 5.6 and move in with the 35 so the same area is covered.
I can`t remember if my 35 IV opens full and it inaccessable now.
teemu.laine
Member
Ok, I´ll try that. I´ll still have it checked with my body, because of the aperture ring that doesn´t stop at "2" but keeps going for almost a half stop... Thanks for yor help!
robert blu
quiet photographer
Congratulations for your set ! Hope to see more pics in future ! I like the fourth one (leica 001) you attaches. bye
teemu.laine
Member
Tried measuring @ f5.6 and 1/125s and everything worked perfectly. With slower speeds there´s some problems, but CLA should do the trick. Beautiful camera.
Fred
Feline Great
teemu.laine welcome to the forum, and to the land of Leica.
Good luck with the CLA, the built in meter of the M6 is really useful as well. Have fun with the CV15, a lovely lens who's quality far exceeds its price
Good luck with the CLA, the built in meter of the M6 is really useful as well. Have fun with the CV15, a lovely lens who's quality far exceeds its price
retrocam
Too many 50mms
Congratulations! Your gear looks good. Keep us updated...I like to know more about the 15mm CV.
-annie
-annie
teemu.laine
Member
Just came back from Helsinki Motorcycle Exhibitionl, shot few rolls of t-max and tomorrow i´ll have to develop ´em in X-TOL. I used CV 15mm a lot and took some test shots with my 90mm also. Can´t wait to see the results!
Last edited:
teemu.laine
Member
http://www.kameralaukku.com/articles/leica/album/index_lb.html
Here you go, pictures 05 -> are from my first two T-Max rolls through my Leica. Developed in T-Max and scanned with Minolta Scan Multi.
Here you go, pictures 05 -> are from my first two T-Max rolls through my Leica. Developed in T-Max and scanned with Minolta Scan Multi.
skarpia
Member
Welcome!
Ja sama suomeksi!
Good to see more of us in here. Where'd you buy the set? Quite a good price, I'd say.
Ja sama suomeksi!
Good to see more of us in here. Where'd you buy the set? Quite a good price, I'd say.
teemu.laine
Member
Terve!
I bought it from Rajala Camera in Turku, This set was there for few months with almost 1000 euros higher price tag and I decided to give an offer to see if the seller would accept it. And he/she did.
I bought it from Rajala Camera in Turku, This set was there for few months with almost 1000 euros higher price tag and I decided to give an offer to see if the seller would accept it. And he/she did.