deanf
Newbie
Just got a GW690II. Need a screw-in eyepiece with a corrective diopter. Where can I find one? Thanks.
skibeerr
Well-known
You will have to look for a Nikon 19mm eyepiece, a la FM3.
http://www.ebay.com/sch/i.html?_trk...nkw=nikon+diopter+eyepiece&_sacat=0&_from=R40
Make sure the thread diameter is 19mm as there where some variations.
http://www.ebay.com/sch/i.html?_trk...nkw=nikon+diopter+eyepiece&_sacat=0&_from=R40
Make sure the thread diameter is 19mm as there where some variations.
skibeerr
Well-known
Look here for compatibility.
http://www.nikonusa.com/en_INC/IMG/...PDF/Eyepiece_Compatibility_Chart_07012008.pdf
your column is the one for FA, FE, FE2 till FM3a.
http://www.nikonusa.com/en_INC/IMG/...PDF/Eyepiece_Compatibility_Chart_07012008.pdf
your column is the one for FA, FE, FE2 till FM3a.
t.s.k.
Hooked on philm
What strength do you need? I have two -3 that I find are too strong.
Prefer a PM if this is what you need.
btw welcome to rff.
Prefer a PM if this is what you need.
btw welcome to rff.
deanf
Newbie
Thanks for all the tips, folks.
sevo
Fokutorendaburando
Look here for compatibility.
http://www.nikonusa.com/en_INC/IMG/...PDF/Eyepiece_Compatibility_Chart_07012008.pdf
your column is the one for FA, FE, FE2 till FM3a.
If you aren't picky about the looks, F, F2 and F3 (non-HP) eyepieces fit as well - but they have a wider rim than original.
Share: