ptpdprinter
Veteran
I generally shoot only one film type so I have a pretty good idea what’s in my camera.
mike rosenlof
Insufficient information
I almost never carry bodies with different film types when I go out. Too many variables. I use film box tops, tape, whatever I can attach to a body if it is loaded with anything other than hp5. If no label, It's hp5.
webOSUser
Well-known
I will sometimes go out shooting with different films in my cameras, so leave a roll in a camera for a couple of months. So I need some way to know what film is in which camera.
David Hughes
David Hughes
A pencil and the back of an envelope with a little bit of organisation would do the trick; there are more expensive versions possible but...
Regards, David
Regards, David
webOSUser
Well-known
I took a look at the suggested solutions and went with up using a piece of tape on the camera or film back to track what film is in it. The beauty of it is that I can look at the camera and know what film is being used. And using a low-acid masking tape as Andy suggests should help protect the camera coverings.
The other solutions either require looking at a something else, smart phone app, envelope, notebook, which is an extra step. Or attaching a tag to the camera or film back. And the Kiev88 film backs don't have a ring to put the chain through.
I will keep looking at FilmTrackr.com and the notebooks as a way to keep track as to what I am doing on each frame of the film. One thing that the piece of tape won't help with.
Thanks to all for their suggestions.
Steve W
The other solutions either require looking at a something else, smart phone app, envelope, notebook, which is an extra step. Or attaching a tag to the camera or film back. And the Kiev88 film backs don't have a ring to put the chain through.
I will keep looking at FilmTrackr.com and the notebooks as a way to keep track as to what I am doing on each frame of the film. One thing that the piece of tape won't help with.
Thanks to all for their suggestions.
Steve W
ptpdprinter
Veteran
I don't have enough cameras and shoot a wide enough variety of film to need an app to keep track of it. I would be more likely to forget to update the app than forget what film is in the camera.
johannielscom
Snorting silver salts
I just put camera and film in one iPhone picture before loading.
Whenever I'm in doubt (this happens all the time), I just have to scroll back in my iPhone pictures until I run into the most recent picture of said camera, and it will show the film that was loaded, as well as the date I loaded it.
Easy peasy.
Whenever I'm in doubt (this happens all the time), I just have to scroll back in my iPhone pictures until I run into the most recent picture of said camera, and it will show the film that was loaded, as well as the date I loaded it.
Easy peasy.
kxl
Social Documentary
iPhone
camera serial #, currently loaded film
camera serial #, currently loaded film
Erik van Straten
Veteran
The best thing to do is to use only one kind of film.
Erik.
Erik.
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.