Darthfeeble
But you can call me Steve
I've been getting B&W magazine which is different than B+W, I'm going to let them go when this subscription expires. I just don't seem to like most of the content in it. How would you describe the content in your magazine?
hap
Well-known
arghhh! I really want a similar digital back for my 503cx
Darthfeeble
But you can call me Steve
mrtoml
Mancunian
I like it. I have recently resubscribed, but it is UK focused. It mainly focuses on photographers and portfolios rather than technical articles and product reviews although these are covered sparingly. It also has book reviews and listings of UK exhibitions. I find it useful for keeping up to date.
Vince Lupo
Whatever
Live View works - I just tried it on my 1000f. If you hit the Live View button then open the shutter on the 'B' setting it will work.
Congrats on getting the camera -- looking forward to seeing some photos!
shawn
Veteran
A tiny Sirui AM223 carbon fiber table top tripod and ballhead combo. Was looking something a bit more flexible than my old Manfrotto table top tripod.
Yokosuka Mike
Abstract Clarity
There are a lot of camera totting train buffs around here; especially on a Sunday. I frequently see hoards of school boys on the train platform with nice cameras taking pictures of the trains.
They also make a strap to match the seats on the Yamanote line. UNX-8668
Mike
Darthfeeble
But you can call me Steve
Thank you Vince, I've been trying a bunch of different ways, does the 1000 have a shutter in the lens or in the camera? I tried something like what you mentioned and didn't get far. Pix will come when I finally get the exposure figured out. I know my lenses need service and they seem to be off. I have a recent Sekonic 308 and a PME 3 that seem to agree within a stop and they all under expose when using the recommended setting. If I increase the EV value on the lens it solves the problem until I get the whole kit serviced.
Vince Lupo
Whatever
The 1000f has a focal plane shutter. I can try it tomorrow with my 500C. Can’t see why it won’t work.
Vince Lupo
Whatever
Curiosity got the better of me and I tried it just now. Yes it works with my 500C and my 60/4 Distagon.
Did you make sure to set the ‘camera type’ to 500? Make sure your camera is set to that, electronic shutter is off. Set your lens to B, hit the LV button on the rear screen and then depress the camera’s shutter. Live View will come up.
Darthfeeble
But you can call me Steve
I got it to work, I had to crank the ISO up to 6400 and set the EV at 6 and at that it was a little odd looking, I really don't see a use for it with the 500, Holding the shutter open for as long as it takes my feeble brain to declare the image suitable to take makes the exposure blown out. I wait for the lens adapter with bated breath. Thanks for the help.
p.giannakis
Pan Giannakis
My annual supply of Fotospeed FX-30 odourless fixer and some Hama negative sleeves.
stephen_lumsden
Well-known
Negative sleeves also for 120 and 35mm. I have been putting this off for the last two years and have a large backlog
pseudobreccia
Member
The following photos were taken with a Fujifilm X-T4 with the Voigtländer NOKTON 50mm F1.2 lens.
shawn
Veteran
Found Rick Olsen's diagrams to remove the top cover and took a peek inside the Contax D.
Turns out the high/low speed selector switch just had some very hardened grease on the rear of it. That along with a pretty strong detent in it made it not slide from high to low as I wasn't going to force it. The selector mechanism inside was fine. Cleaned out the old grease on the switch and put a touch of white lithium grease on it and put it all back together. All speeds working now.
AntonioC
Established
This! (I mean the lens 
)
)
p.giannakis
Pan Giannakis
I managed to snatch this one for £70. Apparently it is in good working order. I'll run a test fim when it arrives.
seany65
Well-known
This week I bought 8 expired (1989) 110 format Kodak Verichrome pan 125asa cartridges.
Or I WOULD have done, if the browser I was using could work with ebay's bidding thingy. I didn't know this at the time. It does work with the "buy it now" thing. IF I'd tried bidding a few minutes earlier I would've been able to switch to a different browser which may have worked.
Or I WOULD have done, if the browser I was using could work with ebay's bidding thingy. I didn't know this at the time. It does work with the "buy it now" thing. IF I'd tried bidding a few minutes earlier I would've been able to switch to a different browser which may have worked.
AntonioC
Established
Just arrived. Wasn’t expecting it to be so light, quasi toy-like. I guess that will be a plus, still feels like an expensive piece of plastic to me.