3D printed camera accessories...

[shawn]

Bessa R grip.

I tweaked the design slightly to recess the mounting screw somewhat and to add another strap lug for a vertical hang. At 100% infill the grip is only 21grams.

 

[Zuiko-logist]

I printed and used this Pentax MX grip. Takes a bit of work to attach but the shape is nice.

I created this aperture ring tab for the Olympus 35RC. Not perfect but it makes the ring more useable. The design isn't hosted anywhere but I would be happy to send it along to anyone interested.

I use an MX grip like this. Very helpful for handling.

 

[Zuiko-logist]

I would love some 3-D printed film gate inserts for the Lomo Lc-Wide. Impossible to find anywhere.

 

[shawn]

Based on this video it looks like they would be easy to measure and turn into a 3d model. Could probably reverse engineer them from just the camera body too.

 

[Zuiko-logist]

Based on this video it looks like they would be easy to measure and turn into a 3d model. Could probably reverse engineer them from just the camera body too.

Thanks! I will try. They seem to be quite simple inserts.

 

[shawn]

Thanks! I will try. They seem to be quite simple inserts.

Yup, and the layout looks like it could be 3d printed easily. If you haven't used any design software maybe give Tinkercad a try? It is free online software. It usually isn't the best for things with precise measurements but with the layout of those inserts it should do fine. Just go through the tutorial to see how you build things by grouping different shapes. I'd probably tackle that as two rectangular prisms for the parts that fit into the sides of the film gate and then two rectangles holding them together vertically top and bottom (make them maybe .8mm thick) and then another rectangle on top for the film gate. Make that one maybe .6 or .8mm thick so there are enough layers to make it opaque.

If you get lost let me know the measurements and I could model it in another program easily.

 

[shawn]

Contax/Nikon S body cap. Just tried it in my S2 and it fits great.

 

[Zuiko-logist]

P

Yup, and the layout looks like it could be 3d printed easily. If you haven't used any design software maybe give Tinkercad a try? It is free online software. It usually isn't the best for things with precise measurements but with the layout of those inserts it should do fine. Just go through the tutorial to see how you build things by grouping different shapes. I'd probably tackle that as two rectangular prisms for the parts that fit into the sides of the film gate and then two rectangles holding them together vertically top and bottom (make them maybe .8mm thick) and then another rectangle on top for the film gate. Make that one maybe .6 or .8mm thick so there are enough layers to make it opaque.

If you get lost let me know the measurements and I could model it in another program easily.

Thank you!

 

[shawn]

Contax/Nikon inner/outer rear lens cap. Also has a longer version to fit the Jupiter 12.

 

[shawn]

Fuji GX680 AA battery adapter
I saw someone hack a rechargable digital camera battery for the Fuji. I might take this model as a base and do something similar. The original NICAD packs for the v1 and v2 GX680s were apparently around 7.2v. The facotry Fuji AA pack is 9v so it seems like the camera voltage regulates internally. The v3 runs on either the AA pack or (3) CR123A batteries.

Another take on a battery pack.

GX680 6x6 mask and 645 mask for the IIIN film pack,

Copal 0 lens plate for the GX680

 

[shawn]

M10 LCD Cover

Another M10 LCD Cover

Hinged M10 LCD Cover

 

[shawn]

Just made this meter cover for Rollei Magic/Magic II.




STL is in the zip file.

 

[boojum]

Just made this meter cover for Rollei Magic/Magic II.


View attachment 4846666

STL is in the zip file.

Super

 

[WoodallP]

There is 2D magic to be had too. Machines such as Brother’s Scan n Cut can cut material for camera covering. Just playing at the moment but you can refine with paper then use the real stuff. Stretchiness seems to be a slight issue; but that is mostly with Barnacks where you have 30+ cm of material.

 

[Alpsman]

Just found this thread . . .

Hook for the center column of the older Manfrotto tripods

Manfrotto Stativ 055c Haken für Mittelsäule Manfrotto tripod 055c hook for short center column by blechbude | Download free STL model | Printables.com

Manfrotto Stativ 055c Haken für Mittelsäule tripod 055c hook for short center column | Download free 3D printable STL models

www.printables.com

Manfrotto Stativ 055XPROB Haken kurze Mittelsäule 055xccsb hook for short center column 055xccsb by blechbude | Download free STL model | Printables.com

Manfrotto 055XPROB Stativ Tripod Haken kurze Mittelsäule 055xccsb hook for short center column 055xccsb | Download free 3D printable STL models

www.printables.com

Inserts for the some of the Nikon S2 compartment cases.
Attention: does not fit all cases

upper insert for Nikon compartment case model II rangefinder by blechbude | Download free STL model | Printables.com

Einsatz für Nikon Tasche Modell II, Meßsucherkameras. Insert for Nikon compartment case model II, rangefinder cameras. | Download free 3D printable STL models

www.printables.com

lower insert for Nikon compartment case model II, rangefinder cameras. by blechbude | Download free STL model | Printables.com

Einsatz für Nikon Tasche Modell II, Meßsucherkameras. Insert for Nikon compartment case model II, rangefinder cameras. | Download free 3D printable STL models

www.printables.com

Mask for Hasselblad for 35x56mm with sprocket holes + case

Hasselblad mask for 35x56 mm with sprocketholes by blechbude | Download free STL model | Printables.com

Hasselblad mask for 35x56 mm if you want to expose your 35mm Film with the sprocketholes. | Download free 3D printable STL models

www.printables.com

Box for Hasselblad mask for 35x56 mm with sprocketholes by blechbude | Download free STL model | Printables.com

Box for the Hasselblad mask for 35x56 mm if you want to expose your 35mm Film with the sprocketholes. | Download free 3D printable STL models

www.printables.com

Cans for bulk film. Light tightness is not guaranteed.

Filmdose Filmcan filmcanister für 17; 30,5 und 50 Meter 35mm Film by blechbude | Download free STL model | Printables.com

Filmdose für 17: 30,5 und 50 Meter Filmrolle Meterware 35mm Filmcan for 55'9; 100 and 164 foot bulkfilmroll | Download free 3D printable STL models

www.printables.com

Winding knob for film cartridges

Winding knob for film cartridges canisters Wickelknopf für Filmpatronen by blechbude | Download free STL model | Printables.com

Small winding knob for spooling the film in the film cartridges | Download free 3D printable STL models

www.printables.com

Film containers

Container Behälter for Nikon reloadable film casettes Filmdose by blechbude | Download free STL model | Printables.com

Container for Nikon reloadable film casettes - Behälter für Nikon wiederbefüllbare Filmkasetten Filmdose | Download free 3D printable STL models

www.printables.com

Container Behälter for Leica reloadable film casettes Filmdose by blechbude | Download free STL model | Printables.com

Container for Leica reloadable film casettes - Behälter für Leica wiederbefüllbare Filmkasetten Filmdose | Download free 3D printable STL models

www.printables.com

Container Behälter für 135 Filmpatronen Filmcartridges Kleinbildfilm Filmdose by blechbude | Download free STL model | Printables.com

Verschraubbare Behälter für 135 Filmpatronen KB Film Container for 135 Filmcartridges Kleinbildfilm Filmdose | Download free 3D printable STL models

www.printables.com

Container Behälter für 120 Mittelformatfilm Medium Format Film Filmdose by blechbude | Download free STL model | Printables.com

Verschraubbare Behälter für 120 Mittelformat Film Container for 120 Medium Format Film Filmdose | Download free 3D printable STL models

www.printables.com

 

[Alpsman]

Simple handle for the Nikon rangefinder cameras S2 and/or SP. Could also fit the S3 or S4, but these two cameras are not available to me for testing purposes.
A 1/4" UNC screw is required for mounting; those from the tripod quick-release plates such as Manfrotto will fit.
Caution! In order to remove the back panel to insert or remove film, the handle must first be removed.

Nikon S2 SP Griff Griffleiste, grip, handgrip by blechbude | Download free STL model | Printables.com

 

[samn09]

Does anybody have a design for the Leica M3 take up spool?

 

[Alpsman]

Containers for the Nikon reloadeable filmcasettes for S2, S3, S4, SP, F and F2

All started with a damaged lid of a filmcontainer.

I've make the model nearly similar to the original container.
The container has the same three-start thread as the original containers. The lid or the base can be replaced with the original part; see pictures. If the original lid breaks, you can replace it with a reprinted one.
Or print lids in different colors for different films or . .
Printed with PLA, it is recommended to print the part with the thread with a lower layer height (0.1 mm).

For Nikon S2, S3, S4, SP and F

Behälter für nachladbare Nikon Film Kassetten; Container for refillable Nikon film cassettes by blechbude | Download free STL model | Printables.com

Behälter für nachladbare Nikon Film Kassetten; Container for refillable Nikon film cassettes | Download free 3D printable STL models

www.printables.com

For the Nikon F2 the AM-1 container

Behälter für nachladbare Nikon F2 Film Kassetten; Container for refillable Nikon F2 film cassettes by blechbude | Download free STL model | Printables.com

Behälter für nachladbare Nikon F2 Film Kassetten; Container for refillable Nikon F2 film cassettes | Download free 3D printable STL models

www.printables.com

 

[Alpsman]

Does anybody have a design for the Leica M3 take up spool?

Do you need a printed part or do you need the digital model?
Do you have a drawing and measurements?
I only have a takeup spool from a Zenit S which is a copy from a Leica II with a reflex viewfinder, I dont know if that fits.

 

[Alpsman]

Soft Release Button similar to the AR-1

I'm actually fed up with these soft release buttons. It was simply the challenge of drawing and printing one. They are not necessarily rare but expensive.

I haven't tested how stable the soft shutter release is if ya drop the camera to the ground, but it works. You might want to print with a more stable material than PLA. Fumble the stamp through the bottom part and glue it to the top part with a small drop of superglue. Due to the fine thread, print with as low a layer as possible.

Softauslöser; Soft Release Button / Soft Shutter Button for Nikon Rangefinder, F, F2 and others AR-1 by blechbude | Download free STL model | Printables.com