EPSON V600 or V700 or .... ?

I tried anti-reflective glass and it wasn't better. I am usually use Epson Scan software. Silverfast is better but it doesn't match what I get from Walgreens.
I agree that the problem is with the film alignment. Are there better 35mm holders than what is provided by Epson for the V700?
 
Scanning results on the V700 seem to be a little dependant on film type in my experience. I've recently started using some Fuji Acros and for some reason the scans are the sharpest I've had with any 135 film.


castleholme015p.jpg
 
I have not changed my mind about the V700. I need to learn how to best scan film with such a scanner after getting it.
 
The height of the V700 film holders above the glass can be varied to adjust focussing. Also as others have said there are after-market film holders with height adjustments. You can also make simple shims to test film height vs focus point.
The V700 is great for 120 and above (not so great for 35) IMO
 
Hello Raid -- Enjoyed our meeting in Boston!

V600 will do 120 film; the V700 can scan larger transparencies/negatives.

My V500 scans of 6x9cm negatives give me prints of 12x18 inches that I think are plenty sharp. That's 6x the linear dimension of the film. The V700 is better.

Flatbed for 35mm is only good for web/screen images. I doubt you'll be satisfied with flatbed scans of 35mm.

Google "Moran Epson V500" for more, including sample images at 12x18, or just PM me and I'll send you a file of this image:

100201-Mamiya-100-f28-Cheers-Img6-v500-Scr.jpg
 
raid said:
Then I would need two scanners, and this is not what I want.
Click to expand...

Raid: realistically you choices are a combination of 35mm film scanner and a flatbed for MF or the better solution of a MF film scanner (Nikon 8000/9000 or Minolta Multi Pro) which will also scan 35mm perfectly.

Consider what you may spend for a scanner vs. what you have already spent for all those lenses and cameras. Then remember that line about a chain being no stronger than its weakest link.
 
maddoc said:
When I want excellent tonal range over emphasized grain and contrast for BW films (135) then I prefer my V700 every time over the Coolscan 4000ED (which in turn is more convenient to batch scan a complete roll at once and Nikon Scan is better to use for color material than Epson Scan software). . .
Click to expand...

You could smear Vaseline on the lens of the Nikon and get the same effect.

Consumer flatbeds are fine if you don't print too large. I've yet to see one that produced much over 2400 dpi of real resolution. Just don't expect to pull much detail out of really dense regions of slides.

http://www.terrapinphoto.com/jmdavis/
 
The weakest link

The weakest link

Bob Michaels said:
Raid: realistically you choices are a combination of 35mm film scanner and a flatbed for MF or the better solution of a MF film scanner (Nikon 8000/9000 or Minolta Multi Pro) which will also scan 35mm perfectly.

Consider what you may spend for a scanner vs. what you have already spent for all those lenses and cameras. Then remember that line about a chain being no stronger than its weakest link.
Click to expand...

Of course, I am aware of this critical point, Bob.
This is why I am taking my time to look deeper into what I need to get.
When the Nikon CoolScan III was still current, I had it, and I liked it for 35mm negatives and slides scans. Now it is obsolete.

The purchase of a good scanner (or two), would imply independence from commercial scanning.
 
ColSebastianMoran said:
Hello Raid -- Enjoyed our meeting in Boston!

V600 will do 120 film; the V700 can scan larger transparencies/negatives.

My V500 scans of 6x9cm negatives give me prints of 12x18 inches that I think are plenty sharp. That's 6x the linear dimension of the film. The V700 is better.

Flatbed for 35mm is only good for web/screen images. I doubt you'll be satisfied with flatbed scans of 35mm.

Google "Moran Epson V500" for more, including sample images at 12x18, or just PM me and I'll send you a file of this image:

100201-Mamiya-100-f28-Cheers-Img6-v500-Scr.jpg
Click to expand...


Hi Col. Sebastian,
It was a pleasure meeting you in Boston. I may get back to Boston in the coming weeks, but this is still in the planning stage.

My wish for the V600/V700 is mainly for MF scans.
Your image looks very good here.
 
Keith said:
Scanning results on the V700 seem to be a little dependant on film type in my experience. I've recently started using some Fuji Acros and for some reason the scans are the sharpest I've had with any 135 film.


castleholme015p.jpg
Click to expand...


Hi keith,
So you are among the minority who finds the V700 to be good with a 35mm film. Maybe the ACROS lends itself somehow for scanning with the V700?
 
O.C.D.-Pixel Peeping Flavor is rampant at these scanner conversations.

Agreed. If somebody else is paying the freight, and I needed the best possible print, I would buy a pro quality drum scan. For the other 99.99% of the time, Epson rocks!

Wayne
 
raid said:
Hi,
I want to buy a scanner that can handle MF negatives and 35mm, and I am planning to get the Better Scan glass for flatter negatives. I am planning to keep the cost below $600. Are there many options here?

Thanks.

Raid
Click to expand...

Regarding to the 35mm side of your wish: If you pay great emphasis on the output quality (even for web) then put these two formats apart from each other. To like flatbed results demands some compromises first; for I did, I learned and I can comment on.

For example with a Minolta Scan Elite 5400 I get 35mm B&W above 30MB and color over 90MB files. 5400 II is better in speed.. I use both since years and they cost a fraction of their Nikon brethren.

The following thread is long, 12 pages; go through it in your convenience. Many questions in your mind will be answered when you reach the end.

http://photo.net/digital-darkroom-forum/00SCs7

Bear in mind that the worst formats to scan, resolution wise as well as for tonality, are the ones smaller than MF; one ton of issues. Having to live with compromises on the flatbeds may kill the joy of scanning 35mm. On one side you think "I pay so much for a body, so much for a lens so what the heck are these for if they would not be expressed like they are worth for?!"

It's not much different than spending days for taking down a great article and then handing it to a novice interpreter to spare money and ending up only with a dull translation.
 
I wish y'all would display the 35mm crap you're getting from flatbed scanners. I also wish I had some of what y'all are smoking when you tell a valued member of this Forum to buy dead dinosaur scanners that can't be repaired and don't have up to date software.
State of the Possible makes a lot more sense than Once Upon a Time a Long Time Ago State of the Art.
Get real people.
Now, somebody tell me what's so bloody terrible about this...Click this image for a bigger version. Scanned on an Epson flatbed that was built sortly after Edison invented the light bulb.



Raid, you better shop for a drum scanner. Obviously they are the only scanners that meet the local quality standards.

Wayne
 
I found my V700 "good enough" for 35mm, and outstanding for 6x6 and 6x9.

I think you have to have very high standards if the output is not good enough. I know some people talk about how much we spend on cameras/lenses etc. but plenty of people here will shoot Tri-X 400 with a Summilux, and not resolve half the resolution the lens has to offer.

I think that if a V700 is not good enough for MF, then either send off for a drum scan, but I'd think it's more than good enough for 99% of us.

For 35mm, I think these days I'd get a Plustek and not bother with the older Nikons. Minoltas etc. The Plusteks look great, no review I've seen shows the Nikon is better in any serious way, and I'd like to support what Plustek are doing.
 
aperture64 said:
They can't because the majority of people that bash Epson flatbed scanners, especially for 35mm, don't own them. Like photography equipment, they are more concerned about numbers and performance tests, instead of going out and actually using the equipment. I am on my third Epson and have had no problem with any of them. Printed 35mm up to 12x18" and the results of the print completely exceeded my expectations. In the right hands, they are perfectly capable scanners. Sure, a dedicated film scanner may be better, but the price also reflects that and who wants to own multiple scanners for different formats?
Click to expand...

Amen Brother aperture64!
Like all of the M5 detractors.

Wayne
 
You must log in or register to reply here.

Similar threads

R
Epson 4490 Upgrade For Scanning Photos.
Replies
0
Views
629
rl1856
R
Rogier
Film holder Epson V850
Replies
4
Views
540
Rogier
Rogier
D
Kodacolor Slides
Replies
3
Views
354
Freakscene
Freakscene
R
Newbie B+W Development Questions
Replies
13
Views
784
Bolo Kukus
B
jaredangle
OOF scans on Epson V550?
Replies
10
Views
2K
Freakscene
Freakscene
Back
Top Bottom