How to get my G2 to auto detect the film iso?

[haagen_dazs]

hey guys
i kind of forgot how to set up my G2 to auto detect the film iso when i load the film in.
i always manually set the iso by pressing holding the small button on the left down and turning the dial wheel to change the iso setting.

can someone refresh my memory pls?
thanks
=)

 

[uhligfd]

Put camera power on by the switch, touch the ISO button, front left, until the ISO value blinks in the LCD window, hold button down and twiddle the distance wheel (up front) : that changes the manual ISO setting; go up or down and exactly between 25 and 6400 ISO, there is the auto iso setting point. When the proper value shows automatically, just turn camera power off and back on and now that ISO is set automatically for any suitable film.

I use but one film (mostly) and downrate its sensitivity, so I use manual 320 ISO for a nominally 400 ISO film and never change this value using that dial ...

 

[haagen_dazs]

ahh yes i did it !
i saw the DX ..
i am so dumb. i guess i turned the wheel so fast that i did not see the DX come up.
=)
i rather push the film using the +/- then the iso...
i forgot to manually change the iso for a roll last week and realized the mistake midway through so thats why i want to get the auto detect on =)

thanks again