raid
Dad Photographer
My only cloth shutter curtained camera left is the Standard Leica.
mooge
Well-known
also, look for bubbling of the rubber on the side facing the lens. I tried burning a curtain a while back and it would smoke and the texture would go all bubble-like before it burned. I'm not sure all burnt shutters will show that though.
good luck...
good luck...
johannielscom
Snorting silver salts
Check both curtains, Raid. Advance the shutter and check. Then release and check again. It should be somewhere.
If the sun was strong, it might be a pinhole, it should be! If it were a big hole, the spot would have been much larger. You may need to point the camera at a very bright and steady source like a halogen ceiling light, and move it around a bit while looking at it from different angles.
If the sun was strong, it might be a pinhole, it should be! If it were a big hole, the spot would have been much larger. You may need to point the camera at a very bright and steady source like a halogen ceiling light, and move it around a bit while looking at it from different angles.
raid
Dad Photographer
also, look for bubbling of the rubber on the side facing the lens. I tried burning a curtain a while back and it would smoke and the texture would go all bubble-like before it burned. I'm not sure all burnt shutters will show that though.
good luck...
I will test this aspect too when I get home tonight.
Thanks for the tip.
raid
Dad Photographer
Check both curtains, Raid. Advance the shutter and check. Then release and check again. It should be somewhere.
If the sun was strong, it might be a pinhole, it should be! If it were a big hole, the spot would have been much larger. You may need to point the camera at a very bright and steady source like a halogen ceiling light, and move it around a bit while looking at it from different angles.
The pinholes may be so small that in my quick testing I was unable to see them. I held a strong light pointed at the curtain while I looked from the other side, This was done in a dark room. I saw only the black cloth and not light at all. Maybe I should point the camera at the wall to see if I see any light.
I will try also your suggested method, Johan.
Thanks.
ferider
Veteran
Sorry, Raid.
Like Fred said, it could also be the Canons. And do check both curtains.
Roland.
Like Fred said, it could also be the Canons. And do check both curtains.
Roland.
raid
Dad Photographer
I will then inspect the Canon P's too.
This is a pain ....
Thanks, Fred and Roland.
To some degree, I hope it is a P and not a Leica.
I never leave any camera on a picnic table or anywhere else in the sun. I carry them like little babies ... very carefully.
This is a pain ....
Thanks, Fred and Roland.
To some degree, I hope it is a P and not a Leica.
I never leave any camera on a picnic table or anywhere else in the sun. I carry them like little babies ... very carefully.
mudride
Established

Here's two pictures, showing how a small pinhole (Leica M6) may look like.

raid
Dad Photographer
I will use a magnifying glass tonight to "scan" all shutter curtains. Thanks for taking the time to post the two pics.
raid
Dad Photographer
It may have been a Canon P with its first test roll. I hope it is, but I don't know how to find a pinhole in a metal shutter curtain.
raid
Dad Photographer
It is the olive green Canon P that I bought from Japan that has the small hole in the shutter curtain. I have to especially thank Fred for pointing out that not only cloth shutter curtains can get punctured.
This is a great relief. The Leica M3 and M6 and Standard are fine. I will get some liquid watachmacallit liquid from Home Depot and will use a tooth pick.
This is a great relief. The Leica M3 and M6 and Standard are fine. I will get some liquid watachmacallit liquid from Home Depot and will use a tooth pick.
raid
Dad Photographer
I will just do this. I will get liquid electric tape.
raid
Dad Photographer
So you prefer a flat black latex paint instead?
_goodtimez
Well-known
Hi Raid,
Take a second look at your ruined film and tranfer the position of the star on the frame window, to indicate you where to precisely look at.
Take a second look at your ruined film and tranfer the position of the star on the frame window, to indicate you where to precisely look at.
Ducky
Well-known
Have you considered a processing error, possibly a spec of dust in the processors system?
raid
Dad Photographer
Hi Raid,
Take a second look at your ruined film and tranfer the position of the star on the frame window, to indicate you where to precisely look at.
Hi,
I have done this, and I was able to find the hole in the shutter curtain.It is more a tear than a hole.
raid
Dad Photographer
Have you considered a processing error, possibly a spec of dust in the processors system?
This was the first thing that came to my mind, hoping to avoid any costlt repairs. It is a shiny part, which indicates a burning into the negative.
raid
Dad Photographer
I will drive to a hardware store in a few minutes.
Thanks.
Thanks.
raid
Dad Photographer
Now I am not sure if it is the Canon P.
This is very frustrating.
I could take a roll of film and pass it in sections through several cameras.
This is very frustrating.
I could take a roll of film and pass it in sections through several cameras.
paulfish4570
Veteran
Bummer, Raid. I hope you get things analyzed and solved quickly ...
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.