Mamiya 7ii Photos

Oregon Dunes

Oregon Dunes

M7II
TMax 100/XTOL
80mm Med. Yellow Filter
30@ f/22
 

Attachments

  • 8-20-2-10-rff.jpg
    8-20-2-10-rff.jpg
    182 KB · Views: 1
Last edited by a moderator:
Ok. I think the 50mm delivers best performance at f/11.
I had some problems with the 43mm to get sharp corners at f/11. Usually I set focus to 7m or 8m. But with this setting the depth of field doesn't reach to the near corners. But I don't want to use f/16 because of diffraction.
 
Markus said:
Ok. I think the 50mm delivers best performance at f/11.
I had some problems with the 43mm to get sharp corners at f/11. Usually I set focus to 7m or 8m. But with this setting the depth of field doesn't reach to the near corners. But I don't want to use f/16 because of diffraction.
Click to expand...

I don't think the M7 is diffraction-limited at f/16.
 
Markus said:
Ok. I think the 50mm delivers best performance at f/11.
I had some problems with the 43mm to get sharp corners at f/11. Usually I set focus to 7m or 8m. But with this setting the depth of field doesn't reach to the near corners. But I don't want to use f/16 because of diffraction.
Click to expand...

Close, according to Pop Photo's tests, the 50 is sharpest at F/8: http://pubpages.unh.edu/~eme39/PP_Mamiya_7II_Lenses_test_and_review.pdf

I've noticed this to be true in the scans I've made, but F/11 and 16 are still very sharp. I haven't noticed any problems with corner sharpness at F/8, though at F/8 the depth of field is noticeably shallower.
 
I recently bought a Mamiya 7 with 65mm from KEH. This is one is an early frame from a roll of HP5+ that I put thru it, scanned with epson V700

I'm in love already. I wish i had more time to shoot

9588668502_8f1cf941e1_z.jpg
 
StoneNYC said:
I love PanF+ I just wish it were available in 4x5

So, what's happening here? This looks like an accidental shot ... Am I wrong?

~Stone | Sent from my iPhone using Forum Runner
Click to expand...


^ this guy was sharpening knives on the side of the road, yep it was prob a bit of rushed shot, could prob save it with some creative cropping...


Also had a few rolls of Portra 160 and Ektar developed, looking forward to getting stuck into processing them asap. Might need to get my head around vuescan though..

10656220864_732c71e845_c.jpg


http://www.flickr.com/photos/huebert/10656220864/
 
You must log in or register to reply here.
Back
Top Bottom