gavinlg
Veteran
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/finepix_x100/index.html
There you go kids. Just minor stuff, interestingly the x10 got an update as well which allowed to the RAW button to be user programmable - so I'd assume the x100 will receive this update soon, and this will make the camera SO much better to use IMO.
Otherwise, fuji don't state any operational upgrades, but I am 90% sure that the AF on my x100 is a little more stable. It seems to be a tad quicker, and a tad more 'sure' with less 'jittering' noises, just more straight to the point. A couple of others have said the same thing on other forums.
Report any differences you notice!
There you go kids. Just minor stuff, interestingly the x10 got an update as well which allowed to the RAW button to be user programmable - so I'd assume the x100 will receive this update soon, and this will make the camera SO much better to use IMO.
Otherwise, fuji don't state any operational upgrades, but I am 90% sure that the AF on my x100 is a little more stable. It seems to be a tad quicker, and a tad more 'sure' with less 'jittering' noises, just more straight to the point. A couple of others have said the same thing on other forums.
Report any differences you notice!
Nelson Tan
Established
Is there still no way to access Auto ISO as part of the ISO speed range? I find it inconvenient that I have to access deep into the menu to turn Auto ISO on/off, when my DSLR lets me pick Auto ISO as part of the ISO speed selection menu.
gavinlg
Veteran
Nope, hasn't been changed.
Richard G
Veteran
I love it that they still haven't corrected item 1 of the major firmware upgrade where the command wheel can be locked. It was always possible for it to be rocked.
Jurat
Member
I think the AF speed has gotten faster. Can't be sure of it though.
Photosynthetech
Established
Is it just me/my x100 or does everyone else's exposure compensation dial not work anymore. It doesn't matter if I turn it accidentally anymore, but I can't use it at all anymore
boomguy57
Well-known
I feel like my AF is a bit snappier too, and I thought it was my imagination initially since Fuji didn't mention AF as a part of the update. But then I started reading it everywhere...
It's better in low-light too, I'd say.
It's better in low-light too, I'd say.
greyelm
Malcolm
Mine still works after the upgrade. Try a reset from the menu to see if this helps.
Edit:
After thought. Are you on fully manual speed and manual aperture? In which case the compensation dial doesn't work
Photosynthetech
Established
Ah that is it then. Thanks
f16sunshine
Moderator
Ah yes! My slow start up has disappeared. Back to normal again
Snowbuzz
Well-known
Yeah, that would be a big deal. Very irritating as it now stands.
Gid
Well-known
maggieo
More Deadly
gavinlg
Veteran
Ah yes! My slow start up has disappeared. Back to normal again
Make sure you format the SD card every time you put it back in the camera after connecting it to the computer. If you don't, this is what causes slow startup.
keytarjunkie
no longer addicted
I agree that the AF speed seems noticeably faster after the update. Strange how Fuji didn't mention that.
I also look forward to the RAW button acting as another Function button, and for Auto ISO to be included in the ISO menu.
I also look forward to the RAW button acting as another Function button, and for Auto ISO to be included in the ISO menu.
palec
Well-known
My experience is that happens only when the card is not safely removed / ejected by OS from card reader, which leaves the file format in unclean state. Formatting card will clean the mess.
gavinlg
Veteran
Might be something to do with the good old japanese corporate pride - just sneak in some 'under the hood' improvements and you can claim it was that good all along
I've got a feeling we might even get the new 's' and 'c' negative film simulation modes in the next major update. That would be amazing.
Oldskewl808
Established
Does this update cover all the prior updates as well? I bought my X100 second hand and I'm not sure if any updates have been done. Is there a way to tell?
greyelm
Malcolm
Yes covers all previous updates.
To check your version hold down the disp button while turning on.
Oldskewl808
Established
Oh wow, ok. it's 1.11