gabrielcik
Member
Hi,
I recenty bought a Nikon f2 with dp1... the DP1 doesn't work properly...
the needle move but the results are not correct. es. when my other working meter give iso800 f2 1/15 the dp-1 gives: 1/125 or 250 as correct exposure...
I also noticed that the meter work, measure also when there is a cap on the lens (i mean give the same result)...
I tried to adjust the sensitivty of the meter but nothing has happen...
Any help? I am not afraid of opening it and try to repair it by myself... (i didn't pay big money for it
Ciao!
I recenty bought a Nikon f2 with dp1... the DP1 doesn't work properly...
the needle move but the results are not correct. es. when my other working meter give iso800 f2 1/15 the dp-1 gives: 1/125 or 250 as correct exposure...
I also noticed that the meter work, measure also when there is a cap on the lens (i mean give the same result)...
I tried to adjust the sensitivty of the meter but nothing has happen...
Any help? I am not afraid of opening it and try to repair it by myself... (i didn't pay big money for it
Ciao!
sevo
Fokutorendaburando
I also noticed that the meter work, measure also when there is a cap on the lens (i mean give the same result)...
Well, what does it do? If the (non-zero) reading is irrelevant of the lens cap being on or off, that is a bit worse than anything a wrong setting can do, and the meter will be broken.
If there is no reading with the lens cap on, and a wrong (but non-zero) one with it off, check first whether your batteries are good and whether the lens coupler pin is engaged in the prong on the lens and the scale (on the meter front) shows the full open aperture of the lens. You did test it with a lens with "rabbit ears" prong, and know how to couple them?
Paulbe
Well-known
Adding to sevo's comment--when mounting a lens, you have to set the lens aperture to 5.6 to engage the meter coupling pin, and after the lens is mounted, rotate the aperture back and forth to insure the correct setting. You may already know that---
Good luck--the DP1s are great when they are working...
Paul
Good luck--the DP1s are great when they are working...
Paul
JMQ
Well-known
Sover Wong in the UK
http://www.soverf2repair.webs.com
http://www.soverf2repair.webs.com
Huss
Veteran
Sover Wong in the UK
http://www.soverf2repair.webs.com
Yup, he fixed up both my F2 cameras.
Highly recommended (and I shipped them to him from the USA!)
Share: