R-D1 refurbs back on Epson site

Adam-T said:
Thankfully an R-D1 (hence the closeout) as all raw converters work (the "S" flag in the EXIF Data in the R-D1S stops RSE and maybe even C1 in its tracks) and it has the prominent screw for vertical alignment 🙂
Click to expand...

RSE has always worked with my RD1s. Capture One didn't work at first but does now. The screw thing is a definite concern though, although my rangefinder is aligned (right now!!).
 
wintoid said:
RSE has always worked with my RD1s. Capture One didn't work at first but does now. The screw thing is a definite concern though, although my rangefinder is aligned (right now!!).
Click to expand...
hint -for my taste the default sharpening on RSE is far too strong - I like to turn it right down to zero and then apply some in PS - YMMV
 
Where do you get the discount code? I keep missing the in-stock message, and at the rate I'm going, it will be December before I'm lucky enough to get the timing right.
 
slewis said:
Where do you get the discount code? I keep missing the in-stock message, and at the rate I'm going, it will be December before I'm lucky enough to get the timing right.
Click to expand...


I got the code from the first post in this thread. When I applied it it said "Nov '06" so it *may* expire at the end of the month. Still worth a try.

I'm glad i came here and found the code, as it saved me $155 right off the bat!
 
endustry said:
For $1395, I'll risk a misalligned rangefinder and, IF mine has one, will probably just send it straight off to DAG and have it fixed rather than deal with Epson.
Click to expand...

I've seen a do-it-yourself guide to tweaking that VF somewhere on this board or DPR and it doesn't look difficult.

http://www.rangefinderforum.com/forums/showthread.php?t=18901

BTW, where and who or what is DAG? Can someone provide a link. Thanks.
 
Joe Mondello said:
And gone again an hour later!

Good news for me is that my Thanksgiving Day order now shows as "Shipped"! 🙂
Click to expand...
I managed to get an order in. Bad news is that it only shows "Order under review", whatever that means. I'll have to wait until Monday to see if the order was sucessful or not.
 
scho said:
I managed to get an order in. Bad news is that it only shows "Order under review", whatever that means. I'll have to wait until Monday to see if the order was sucessful or not.
Click to expand...

I called as I had that same "Order Under Review" thing on Friday. I spoke with a guy named Michael and confirmed for him that I had entered my cell number instead of my home phone and if the phone number doesn't match the bank records, they put it on hold.

I got it straightened out thanks to Michael and the order of things then went to "Order is being Fulfilled" yesterday to "Shipped" today (Saturday). Best of luck with yours.
 
Well today (Sunday) I have a tracking number and FedEx is saying delivery Tuesday -- not bad for Free Ground Shipping! I thought it would take a lot longer.

BTW, I found a website that warns against using the 50mm f2 DR 'Cron on the Bessa R3A so I am *guessing* that this lens could be a poor match for the R-D1. Shoot! It's the only Leica lens I still have (the rest were stolen long ago).

So, after reading a number of things, I am thinking of the CV 35 1.7 as a good first lens for this cam. Am I on the right track? It's been a long time since I've shot with a RF.
 
Joe said:
BTW, I found a website that warns against using the 50mm f2 DR 'Cron on the Bessa R3A so I am *guessing* that this lens could be a poor match for the R-D1. Shoot! It's the only Leica lens I still have (the rest were stolen long ago)..
Click to expand...


My understanding is not that there is a problem with using the lens but more so with collapsing the lens. When collapsed it has a tendency to contact the shutter. I know that some R-D1 users in this forum have put an O-ring on the lens barrel to keep it from collapsing all the way.


Joe said:
So, after reading a number of things, I am thinking of the CV 35 1.7 as a good first lens for this cam. Am I on the right track? It's been a long time since I've shot with a RF.
Click to expand...

I use the CV 35mm 1.2. I also have a 50mm Cron and 90mm Elmar Macro, but the CV is the the only 35mm that I have. It stays on the camera all the time as I really like the 50mm equiv. field of view.
 
Some helpful links:

www.aignes.com has a program called Web Watcher, which enabled me to snag an R-D1 yesterday. I had it set to check the Epson website every 5 minutes on a running computer and send an SMS to my cell phone when it changed.

http://www.couponcabin.com/coupons/epson/index.htm has coupons for Epson products (obviously, other items as well if you recurse the URL). The 10% off code (6ZNAXFP) is good until Dec 31st, 2006.

hope this helps!

now waiting for my R-D1 and CV Nokton 50/1.5 to arrive...

waldemar
 
waldemarski said:
Some helpful links:

www.aignes.com has a program called Web Watcher, which enabled me to snag an R-D1 yesterday. I had it set to check the Epson website every 5 minutes on a running computer and send an SMS to my cell phone when it changed.

http://www.couponcabin.com/coupons/epson/index.htm has coupons for Epson products (obviously, other items as well if you recurse the URL). The 10% off code (6ZNAXFP) is good until Dec 31st, 2006.

hope this helps!

now waiting for my R-D1 and CV Nokton 50/1.5 to arrive...

waldemar
Click to expand...

Fantastic first post! You're gonna make some folks here very happy. Thanks.

So about those lenses . . . looking at Cameraquest I see the 35 1.2 is pretty big physically while the 35 1.7 is much smaller and the 40 1.4 smaller still.

I also like the "50mm" FOV and my favorite lens on my Nikon D200 is the 28mm 1.4 so perhaps the 28 1.9 might also be good for me. I love low light shooting and wider is almost always better for me.

This should be a fun week around here as these Thanksgiving Day R-D1s start showing up!

Thanks for the info on the 50mm DR. I'm having it sent up from Florida by my brother so I'll get a chance to give it a shot -- assuming it hasn't gone all hazy!
 
endustry said:
Joe,

If we see you tonight, my wife will bring her Bessa R3a and 40mm Nokton. The R-d1 is basically a Bessa so the combo of her cam/lens will be pretty representative of the R-d1. Keep in mind that a 40mm = a 60mm on an R-D1, though.

If you want a more relaxed setting in which to try out various CV lenses, check out Photovillage down near the Flatiron Bldg. They have the whole line of CV lenses and are usually pretty chill (unlike B&H).
Click to expand...

Thanks Aaron. I'll PM you regarding tonite or call you later.

I've been looking for a place other than B&H and Adorama for these lenses so it is really good to know about Photovillage.
 
You must log in or register to reply here.

Similar threads

bluestar01
Had a scare with my R-D1S shutter. Should I be worried?
Replies
8
Views
2K
analoged
analoged
A
Are the Voigtlander Bessa grips compatible with the R-D1?
Replies
2
Views
1K
Asahizuiko
A
A
Epson R-D1 screen death
Replies
15
Views
2K
ddutchison2
ddutchison2
jonwaltermoceyhanton
epson r-d1 owner - seeking repair advice
Replies
6
Views
3K
Darthfeeble
Darthfeeble
Dogman
Just need to vent. Our lives are now overly secure!
Replies
14
Views
526
JeffS7444
JeffS7444
Back
Top Bottom