cam
the need for speed
i was in the middle of shooting RAW & JPEG (which i have happily shot with for over a month), checking out a new lens. when i got home, i find that midway through the camera switched to JPEG only... the setting is still at JPEG & RAW on the camera.
what gives? will this happen again? has this happened to anyone else? is it a camera error? a card error? i'm quite concerned as this is something i've never been concerned with, but i lost some photos that may have been keepers if only i'd had the RAW files...
what gives? will this happen again? has this happened to anyone else? is it a camera error? a card error? i'm quite concerned as this is something i've never been concerned with, but i lost some photos that may have been keepers if only i'd had the RAW files...
LCT
ex-newbie
Check the needle indicator on the top plate, Cam.
Does the right needle indicate R?
Edit: If not, switch the WB/Q lever to the Q position, rotate the jog dial until the right needle of the indicator is set to R and you're done.
Does the right needle indicate R?
Edit: If not, switch the WB/Q lever to the Q position, rotate the jog dial until the right needle of the indicator is set to R and you're done.
Last edited:
