RAW & JPEG changing to JPEG only -- help!

[cam]

i was in the middle of shooting RAW & JPEG (which i have happily shot with for over a month), checking out a new lens. when i got home, i find that midway through the camera switched to JPEG only... the setting is still at JPEG & RAW on the camera.

what gives? will this happen again? has this happened to anyone else? is it a camera error? a card error? i'm quite concerned as this is something i've never been concerned with, but i lost some photos that may have been keepers if only i'd had the RAW files...

 

[LCT]

Check the needle indicator on the top plate, Cam.
Does the right needle indicate R?
Edit: If not, switch the WB/Q lever to the Q position, rotate the jog dial until the right needle of the indicator is set to R and you're done.

 

[cam]

Check the needle indicator on the top plate, Cam.
Does the right needle indicate R?
Edit: If not, switch the WB/Q lever to the Q position, rotate the jog dial until the right needle of the indicator is set to R and you're done.

you brilliant boy! bisous!!!

i don't really want to know how i switched that in the middle of shooting, but i'm obviously talented...

 

[LCT]

you brilliant boy! bisous!!!...