embee06311
getting back into film..
Date: 11-22-17
Project: Walking distance
Camera: Rollei 35
Lens: Carl Zeiss Tessar f/3.5 40mm
Filter: UV
Film: Ilford Delta 400 @320
Developer: Perceptol 1:1
2017-11-23-3015 by Michael Burkholder, on Flickr
Project: Walking distance
Camera: Rollei 35
Lens: Carl Zeiss Tessar f/3.5 40mm
Filter: UV
Film: Ilford Delta 400 @320
Developer: Perceptol 1:1

Another. This flag-painted Quonset hut has been here for decades. I've shot it with a bunch of different cameras over the years!
![]()
Love it...
minotaurus81
Newbie
I have taken my first Film with Rollei 35T. Here are some pictures 
-Rollei 35T + Hoya Skylight filter 1B + BW Rubber Lens Hood
-Film: Agfaphoto APX 100, Expiration 1/2013, stored in freezer
-10 min. presoak in 500 ml distilled water 20°C
-Developer- Caffenol C-L, Semistand, 1 hour
- Jobo UniTank 1520
- 72 ml Dilution of Na2CO3 = 8 grams of Na2CO3
- 5 grams of Vitamin C from DM
- 0.5 gram of Potassium Bromide
- 20 grams of Lidl Instant Coffee Bellarom Red Classic
- fill up with distilled water to 500 ml
Thoroughly mix and let stand for about 10 minutes.
-Temperature - 20°C
-Agitation - First minute continuous agitation (20 inversions, tap on edge to eliminate air bubbles)
- 4 inversions at 2, 4 & 8 minutes (tap on edge to eliminate air bubbles) and then let stand to finished
-Stop Bath - Tip out developer, fill with water, tip out again, refill and gentle agitation for 1 minute. Tip out and repeat for another minute.
-Fixer - Rapid Fixer Fomafix- 5 min.
-Rinse - Ilford rinse method for B&W (but double)
Fill the film canister with water, agitate 5 times, empty.
Fill the film canister with water, agitate 5 times, empty.
Fill the film canister again, agitate 10 times, empty.
Fill the film canister again, agitate 10 times, empty.
Fill the film canister a last time, agitate 20 times, empty.
Fill the film canister a last time, agitate 20 times, empty.
Rinse the film in the tank 5 min. under running water.
-Final Rinse - I use 2.5ml wetting agent Fotonal from Foma to 500ml of distilled water and agitate for a one minute.
http://shakyphotographer.blogspot.co.at/2017/03/my-best-caffenol-c-l-recipe-so-far.html
Thanks for your comments.
Calvary in Trnava
1/30s, f 5.6, 4.5m
Calvary in Trnava by minotaurus 81, on Flickr
-Rollei 35T + Hoya Skylight filter 1B + BW Rubber Lens Hood
-Film: Agfaphoto APX 100, Expiration 1/2013, stored in freezer
-10 min. presoak in 500 ml distilled water 20°C
-Developer- Caffenol C-L, Semistand, 1 hour
- Jobo UniTank 1520
- 72 ml Dilution of Na2CO3 = 8 grams of Na2CO3
- 5 grams of Vitamin C from DM
- 0.5 gram of Potassium Bromide
- 20 grams of Lidl Instant Coffee Bellarom Red Classic
- fill up with distilled water to 500 ml
Thoroughly mix and let stand for about 10 minutes.
-Temperature - 20°C
-Agitation - First minute continuous agitation (20 inversions, tap on edge to eliminate air bubbles)
- 4 inversions at 2, 4 & 8 minutes (tap on edge to eliminate air bubbles) and then let stand to finished
-Stop Bath - Tip out developer, fill with water, tip out again, refill and gentle agitation for 1 minute. Tip out and repeat for another minute.
-Fixer - Rapid Fixer Fomafix- 5 min.
-Rinse - Ilford rinse method for B&W (but double)
Fill the film canister with water, agitate 5 times, empty.
Fill the film canister with water, agitate 5 times, empty.
Fill the film canister again, agitate 10 times, empty.
Fill the film canister again, agitate 10 times, empty.
Fill the film canister a last time, agitate 20 times, empty.
Fill the film canister a last time, agitate 20 times, empty.
Rinse the film in the tank 5 min. under running water.
-Final Rinse - I use 2.5ml wetting agent Fotonal from Foma to 500ml of distilled water and agitate for a one minute.
http://shakyphotographer.blogspot.co.at/2017/03/my-best-caffenol-c-l-recipe-so-far.html
Thanks for your comments.
Calvary in Trnava
1/30s, f 5.6, 4.5m

minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
minotaurus81
Newbie
Tessar is prone to flare
1/500s, f5.6, 3m
I use Rubber Lens Hood. Anyone found a Lens Hood that does a better job?
Tessar is prone to flare by minotaurus 81, on Flickr
1/500s, f5.6, 3m
I use Rubber Lens Hood. Anyone found a Lens Hood that does a better job?

Bingley
Veteran
minotaurus81: I get error messages each time I try to open the links to your flickr photos. Try copying and pasting the BBC code instead.
Bingley
Veteran
Rollei 35S, Portra 160:
Mono Lake and High Sierra by bingley0522, on Flickr
Owens Valley Overlook by bingley0522, on Flickr
Approaching Storm by bingley0522, on Flickr



coogee
Well-known
1/500s, f5.6, 3m
Tessar is prone to flare. I use Rubber Lens Hood. Anyone found a Lens Hood that does a better job?
https://flic.kr/p/22ozDNY
Mine flares a lot too. I don’t have a hood. I see knock offs on ebay but I’m guessing they mean no filter? Anyone know? My Rollei filters dont have front threads.
I also notice some Rollei 35s online have the distance scale in metres on top/feet underneath. Mine (35S) has feet up which is annoying. Is there any rhyme or reason to that distinction or some way to twist it all around?
Lovely shots btw Bingley.
coogee
Well-known
I should also add, as someone who looked at loads of online reviews before buying this camera, not a single one mentioned the negs come out upside down!
Not a big deal and obvious once you've loaded it, but just for information.
And a few pictures from mine (35 Xenar) right way up
TMax
Ektar
Not a big deal and obvious once you've loaded it, but just for information.
And a few pictures from mine (35 Xenar) right way up
TMax

Ektar



-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.