I can't pull the shutter lever, and I can't press the shutter release. This happened last weekend but seemed to reset itself. Is there something I can do?
If you do have the card on write protect when you switch the camera on the number of shots remaining dial only just moves off the zero point. Also as soon as you press the shutter release the activity LED near the cocking leaver will keep flashing.
Yes I did try pulling the battery, actually I charged it, in case the battery meter wasn't reading correctly. I'm feeling pretty bummed since I have only had the camera for 28 days.
Yes I did try pulling the battery, actually I charged it, in case the battery meter wasn't reading correctly. I'm feeling pretty bummed since I have only had the camera for 28 days.
Solved.
I unscrewed the shutter release button and was able to push the pin to release the shutter. I found that the actually button had rotated and was resting on a metal piece so it couldn't be depressed. I rotated the piece tested, and I held it in place while tightening the collar around the button. The problem is solved!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.