cbettis
Member
Anyone shooting Tri-x at 200 and developing in HC-110 dilution H? What are your starting times and results? Thanks, Chuck :bang: :bang:
photodog
Well-known
Try 10 minutes at 68 degrees.
S
stevew
Guest
Dev times.
Dev times.
I use HC-110 H, 14 min @ 68 deg.
My times are a little different because of my agitation. First 30 sec continuous, then at 7-10 sec @ 2 min intervals (invert then set down with a twisting motion). I like to control the highlights and boost shadow detail.
Dev times.
I use HC-110 H, 14 min @ 68 deg.
My times are a little different because of my agitation. First 30 sec continuous, then at 7-10 sec @ 2 min intervals (invert then set down with a twisting motion). I like to control the highlights and boost shadow detail.
tetrisattack
Maximum Creativity!
I don't shoot at 200, but I dev tri-x for 10 minutes (20 celsius) 1:65. If I didn't know what times to use for pulling the film, I would try to err on the side of overdevelopment.
Agitate every minute, or every two minutes to pull out more shadow detail. HC-110 and Tri-X are pretty forgiving.
Agitate every minute, or every two minutes to pull out more shadow detail. HC-110 and Tri-X are pretty forgiving.