Help, Auto mode problem with my OM-2's.

johnny9fingers

johnny9fingers

Well-known
Local time
3:54 PM
Joined
Aug 15, 2005
Messages
341
Location
Superior Wisconsin
View My Gallery
Hello, I'm having a problem getting the auto mode to work on my OM-2. When I shoot in manual everything works fine, but when I switch to auto, the shutter stays open until I hit reset. And now one of the cameras shutter speed dial is very stiff. I have two OM-2 bodies, both recently CLA'd and from different sellers but exhibiting the same problem. This makes me believe either I'm doing something wrong or that theres a problem with my lens. I only have the one lens now, three more will arrive Monday. Has anyone else had this problem or have a solution for me? Thank you,
John
 
Are you testing it with the lens cap on? It will keep the shutter open for the long exposure required. The other thing is: are the batteries fresh?
 
I have an OM2 that does the same thing. A circuit problem of some kind, the repairman said. Didn't have it repaired, though. Just bought another one.
 
Could be a circuit problem ... perhaps John will chime in.

Are you sure the batteries are good? By good I don't mean just "new" ... unless you have silver batteries, NOT ALKALINE, don't be so sure. You need SR44W, 303/357 or equivalent.

The shutter speed dial being stiff on one is disturbing for a camera that has had a CLA. I would ask the seller(s) of both cameras WHO did the CLA, provide a receipt, etc.
 
I thought it might be the batteries as well and put new ones in. I went to my local camera shop and got Sanyo MS76 silver oxide batteries. They replace the SR44 batteries refered to in the owners manual.
 
Yup, I would do the same and ask for proof of CLA. I mean they can say anything just to sell the item, esp by claiming the camera had an overhaul. I once met a seller who claimed his camera had been CLA-ed, one look at the gummy light seals told me otherwise. 😱
 
Well, one the guys is a regular here at RFF and I trust him. As far as the other guy, I accidentally sent too much money for the purchase and he returned the excess. So they both seem like trustworthy fellows.
 
Are you testing them with film loaded? The OM-2 gets it's reading for the slower speeds from the film itself when it's in auto mode. What this means is that without film, it doesn't really know where to set the speed and the shutter will stay open. Just trying to think of other possibilities here..
 
i do have the same problem with my newly bought OM2.
fully working in manual mode which is what I am shooting 90 percent of the time. Only during that once in a while time, when I switch to auto, than i realise it isnt working
 
You must log in or register to reply here.

Similar threads

K
A couple of questions on the Olympus OM-G/OM-20
Replies
5
Views
1K
KoNickon
K
Ko.Fe.
M9 (M-E 220) in filmish mode?
Replies
0
Views
249
Ko.Fe.
Ko.Fe.
Miles.
Olympus OM Lens Repair - Is this a unique problem?
Replies
9
Views
631
Joao
Joao
K
Fujica GEr aperture problem
Replies
1
Views
208
BernardL
B
R
Leica Digital M (11-D) Bugs
Replies
6
Views
1K
Photon42
Photon42
Back
Top Bottom